4-12
4.3.1 WARNING Window
The examples of the messages of WARNING window are listed in Table 4.3.1.
Fig.4.3.1 WARNING Window
Table 4.3.1 Message list of WARNING window
Warning Message Cause Countermeasure
Are you sure you want to
delete the file？[Yes] [No]
Select[No] when you want to keep
the file.
Cannot display binary text.
Press F10 key when you carry on the
job. The data cannot display as
characters .
Do you want to overwrite it?
[Yes] [No]
Select [No] when you want to keep
old file, and save the new data as
new file name.
Formatting will erase ALL
data on the USB drive. To
format the USB drive, choose
Yes.
[Yes] [No]
Now EGC high priority
message is receiving.
When the alarm buzzer is stopped,
hold down the
ctrl key and press A
key.
When the window is closed, press
F10 (“Previous”) key.
Print out Call log The Call logging data of 90 or
more calls are stored then the
oldest call logging data is cleared.
Therefore, print out the call
logging data.
Print out the call logging according
to item 3.9.2 “Print Out”.
Transmitter over loaded. It
may be permanent damaged.
Contact the purchasing dealer, JRC
agent or one of the JRC branches.
Window overflow Windows of the DTE are opened
maximum numbers.
Press F10 key to close the window
one by one, or press ESC key.
Warning
Window overflow
F10: Previous
To Next Page
Loading...
