3-106
Step Operation IME/DTE Response
5
• To start the distress test, press the
distress button again.
• The buzzers in DTE and IME are sounding 5
sec continuously.
• The “DISTRESS” lamp on IME is
illuminating 5 sec.
• When the distress button is tested completely,
the following window is displayed.
6
• To return to Main menu, press
F10
(“Previous”) key and press F7
(“Cancel”) key.
• Main menu is displayed.
--- Distress Button Test ---
Distress button test succeeded.
F10: Previous
Distress buttons are under test now.
Press the distress button to test it
F10: Cancel
Distress button test mode
To Next Page
Loading...
