JRC jue-87 - Logging In to NCS; Logging Out from NCS

3-3
3
3.2 Log In
When the status in the first line on the main menu is “Log-out” or “Egc only”, initiate the “Log-in”
according to the following procedures;
When the “Receive mode” is changed from “Egc receive only” to “Inmarsat-C”. The “Log-In” is
initiated automatically.
Step Operation/Response (Example) Screen (Example)
1
• Hold down
Alt key and press U key on Main
menu.
• “Set up” screen is displayed.
2
• Hold down
Alt key and press I key.
3
• Move the cursor to “Yes” and press
Enter key.
• The status is changed “Comm (TX)” in the first
line on the main menu.
4
• After few minutes,
READY LED on the IME is
lit.
• The status is changed “Comm (TX)” to”
READY”.
• Press ESC key to clear the message window.
•
3.3 Log Out
When the status in the first line on the main menu is “READY”, initiate the “Log-out” according to
the following procedures;
When the received-mode is changed from “Inmarsat-C” to “Egc receive only”, the “Log-out” is
initiated automatically.
Step Operation/Response (Example) Screen (Example)
1
• Hold down
Alt key and press U key on Main
menu.
• “Set up” screen is displayed.
2
• Hold down
Alt key and press O key.
3
• Move the cursor to “Yes” and press
Enter key.
• The status is changed from “READY” to
“Comm (TX)” in the first line on the main menu.
4
• After few minutes,
READY LED on the IME
becomes unlit.
• The status is changed from “Comm (TX)” to
“Log-out” on “Egc only”.
Log-in
Do you initiate log- in ? Yes No
Log-in (10-11-04 12:05) succeeded.
F10:Previous
Log-out
Do you initiate log- out? Yes No
Log-out (10-11-04 13:10) succeeded.
F10:Previous