A5-2
A5.1 Cautions for Use
• Don’t touch immediately after printing as the printing head is still very hot.
• To set the ribbon, pay attention not to twist the ribbon.
• To turn on the power again after once turned OFF, wait at least 2 seconds. If this is not respected,
initialization may become wrong.
• Do not install in humid or dusty place or place exposed to direct sunshine.
• Don’t print without ribbon cassette and paper.
• Set the printer on desk or table installed evenly and stably.
• When the printer is working, its mechanism is working with rather strong force, pay attention not
to approach your accessories, necktie, etc. worn on you. Those may be caught.
• Don’t put anything on the printer. If any thing is dropped in the machine, at first turn OFF the
power, then remove dropped thing carefully.
• Don’t wet the printer. If water etc. is fallen, turn OFF immediately the power, and wipe off liquid.
And wait until the printer becomes completely dry to turn ON again.
To Next Page
Loading...
