3-117
3
3.16.5.4 Call Logging for EPADR
When EPADR Assignment is accessed, downloaded, suspended or resumed, the result for the access is
recorded instead of Msg no in “Msg no” field of call logging (refer to section 3.10).
When the access is accepted, “Accept” is recorded in Msg no field. When the access is rejected,
“Reject” and a reason code (refer to Table 3.16.5.4) are recorded in Msg no field. The reason code is
advised to LES as Fig.3.16.5.4.
Date Time Type of call Destination LES Msg no Size
11-11-08 14:20-14:30 S&F T 07202822351 003 12345 85
. . . Delivered to LES
11-11-08 13:20-13:30 SLCA R 100 003 Accept 14
. . . Call successful
11-11-08 12:20-12:30 SLCA R 100 003 17
. . . Call failure
11-11-08 11:20-11:30 SLCA R 100 003 14
. . . Canceled by Distress
11-11-08 10:20-09:30 SLCA R 100 003 Reject03 17
. . . Call successful
↓ contd. (Total 25)
Fig.3.16.5.4 Example of “Call logging history” Window
Table 3.16.5.4 Reason Code
Reason Code Content
01 Assignment rejected - reason unspecified
02 MES cannot accept new assignments
03
Conflicting assignment - MES should always sent this if there is a chance that the
assignment conflict can be solved with a LES request for assignment schedule.
04 Logical Channel Number already assigned with this LES
05
Destination address rejected - The address is unacceptable
(EG Unknown DNID/member number).
11 Query/control rejected - reason unspecified
12 Query/control rejected - no LCN with commanding LES
13 Resume command for active assignment
14 Suspend command for suspended assignment
15 Terminate command for non-existent assignment
F1:Delivery confirmation F5:Print out F7:Clear history F10:Previous
Call logging history
To Next Page
Loading...
