JRC jue-87 - Setting Navarea;Metarea for EGC Reception

3-94
3.13.3.1 Setting of Navarea/Metarea
Only receives the messages to Navarea/Metarea, which have been set up.
NOTE
Basically, information of Navarea/Metarea in the ocean region being logged in now is sent.
Step Operation IME/DTE Response Remarks
1
• Move the cursor to “egC”
and press
Enter key.
• The “EGC” window is
displayed.
2
• When you want to change
the “Navarea/Metarea”,
press
Enter key.
• The
“Navarea/Metarea”
window is displayed.
3
• When you want to restrict
the “Navarea/Metarea”,
move the cursor to the
restrict “Navarea/Metarea”
number and
Enter key.
• The cursor is moved
To “Enable” or
“Disable”.
4
• Move the cursor to
“Enable” or “Disable” and
press
Enter key.
• The cursor is moved to
next item.
5
• Press
F10 (“Previous”) key.
• The “EGC” window is
displayed.
6
• To return to Main menu,
press
F10 (“Previous”) key
twice.
• Main menu screen is
displayed.
• When you want to
change the another item,
move the cursor and
press
Enter key.
Fig.3.13.3.1a “Navarea/Metarea” Window
Area 1 : Enable Area 12 : Enable
Area 2 : Enable Area 13 : Enable
Area 3 : Enable Area 14 : Enable
Area 3 : Enable Area 15 : Enable
Area 4 : Enable Area 16 : Enable
Area 5 : Enable Area 17 : Enable
Area 6 : Enable Area 18 : Enable
Area 7 : Enable Area 19 : Enable
Area 8 : Enable Area 20 : Enable
Area 9 : Enable Area 21 : Enable
Area 10 : Enable
Area 11 : Enable
F10: Previous
Navarea/Metarea