JRC jue-87 - Appearance Optional Components; RDB Remote Distress Button NQE-3225

2-14
2.3 Appearance (Optional Components)
2.3.1 RDB (Remote Distress Button: NQE-3225)
The DB (Distress Button ) is used to transmitting Distress Alert.
Fig.2.3.1 Remote Distress Button
(1) Distress Button
Used to Distress Alert transmission.
In case of transmitting Distress Alert, open hinged cover and press the button for 4 seconds.
The Lamp is lit during sending the Distress Alert transmission.
(2) READY LED
Illuminates RED: Not synchronizing
Illuminates GREEN: Synchronizing, and able to transmitting Distress Alert
(3) DIMMER
Used to adjust lamp brightness. When it is turn to the right completely, brightness becomes the
maximum. When turning it to the left completely, brightness becomes minimum (shines slightly).
(1)Distress Button
（
With cove
r
）
(3) DIMMER
(2) READY Lamp