JRC jue-87 - Transmitting PSDN Data Messages

3-49
3
3.8.4 Transmitting Data (PSDN) Message
Fig.3.8.4a “Data (PSDN)” Window
Step Operation IME/DTE Response Remarks
1
• Move the cursor to
“Transmit” and press
Enter.
• The “Transmit” window
is displayed.
2
• Move the cursor to the
“data (psDn)” and press
Enter.
• The “Data (PSDN)”
window is displayed.
• “Data (PSDN)” is
optional facility for each
LES.
3
• Move the cursor to the
“Data network id,
subscriber’s number and
answerback” and press
Enter.
• The “Destination”
window is displayed.
4
• Move the cursor to the
“1:” and press
Enter key.
• The cursor is moved to
“subscriber’s no”.
• When the abbreviated
number is used, Press
F2
(“Address book code”)
key.
5
• Type data network id,
subscriber’s number and
press
Enter.
Ex. Data Network ID:
1112
Subscriber’s number:
12345678
1 1 1 2 1 2 3 4 5 6 7 8
Enter
• The cursor is moved to
“2:”.
• The data network id is
provided by each LES.
• Note 1
6
• Confirm each parameter,
and press
F10
(“Previous”) key.
• Data (PSDN) window is
displayed and the cursor
is moved to “File name”.
7
• When the file is selected,
press
Enter key.
• The cursor is moved to
right side.
8
• Press
F2 (“File selection”)
key.
• The “File list” window is
displayed.
Data network id
subscriber’s number : 1117-422459957
File name : TEST.MSG
land Earth station(les) : 203 (Yamaguchi)
posItion : Off
delivery Confirmation : Off
F1: Send call F10: Previous
Data(PSDN)