JRC jue-87 - Delivery Confirmation Procedure

3-76
3.10.1 Delivery Confirmation
When you want to confirm the delivery result of the transmitted message, press
F1 (“Delivery
confirmation”) key of the “Call logging history” window (see previous page), then select the message to
be confirmed on “Delivery confirmation request window”, then press
Enter key.
Then, the delivery information is shown in the window as “Delivery confirmation request”.
This window shows information of all messages you sent, and received message from only LES as
same as “ Call logging history”. But point of difference is, you can check the result of transmission to a
number of subscribers via E-mail, an individual transmission succeeded or not, in this screen.
Fig.3.10.1a Confirmation of the Result of Telex Transmission
Fig.3.10.1b Confirmation of the Result of E-mail Transmission
You send a message from your ship to a
land subscriber, the message is received by
LES at the first.
LES delivers the message
to land subscriber’s
terminal equipment.
You can check the transmission result
whether the message is successfully
received by LES or not, it only have to
check “Call logging history”.
You can check whether the message is
send to the land subscriber, you have to
check it on “Delivery confirmation
re
q
uest” window.
You can check the transmission result
whether the messages are successfully
received by LES, it only have to check
“Call lo
gg
in
g
histor
y
”.
You can check whether the message is
send, to the all land subscribers you
selected, you have to check it with
“Delivery confirmation request”
window.
You send a message from your ship to a
number of land subscribers, the messages
are received by LES at the first.
LES delivers the messages to
land subscriber’s terminal
equipments.