JRC jue-87 - Sending Facsimile Messages

3-45
3
3.8.3 Transmitting Facsimile Message
Fig.3.8.3a Example of “Facsimile” Window
Step Operation IME/DTE Response Remarks
1 • Move the cursor to
“Transmit” and press
Enter
key.
• The “Transmit” window is
displayed.
2 • Move the cursor to the
“Facsimile” and press
Enter
key.
• The “Facsimile” window
is displayed.
• “Facsimile” is optional
facility for each LES.
3 • Move the cursor to the
“Country code-subscriber’s
number” and press
Enter.
• The “Destination” window
is displayed.
4 • Move the cursor to the “1:”
and press
Enter key.
• The cursor is moved to
“subscriber’s no”.
• When the abbreviated
number is used, press
F2
(“Address book code”)
key.
5 • Type telephone country code,
subscriber’s number and
press
Enter.
Ex. Country code: 81
Subscriber’s number:
12345678
0 8 1 1 2 3 4 5 6 7 8
Enter
• The cursor is moved to
“2:”.
• Type triple digits in the
country code. When the
country code is double
digits such as Ex, “0” is
preceded by the country
code.
• Note 1
6 • After confirmation of each
parameter, press
F10
(“Previous”) key.
• The cursor is moved to
“File name”.
7 • When the file is selected,
press
Enter key.
• The cursor is moved to
right side.
country coDe-
subscriber’s number : 081-422459957
Modem of subscriber : T30
File name : TEST.MSG
land Earth station(les) : 203 (Yamaguchi)
posItion : Off
characTer code : Ia5
delivery Confirmation : Off
F1: Send call F10: Previous
Facsimile