3-27
3
3.7.1.2 Block Function
When the block is selected in Edit mode previously, the block can be copied, moved, deleted and etc.
The block function menu is provided on Edit mode. Item of the menu is as follows:
Fig.3.7.1.2a “Block function menu” Window
Top-marker of block ............To select a top-marker of block.
Bottom-marker of block.......To select a bottom-marker of block.
Remove marker....................To remove the block markers.
Copy block...........................To duplicate a block on the edit mode.
Move block ..........................To move a block on the edit mode.
Delete block .........................To delete a block on the edit mode.
Save block as .......................To save a block to the USB drive.
Go to the block.....................To go the cursor to a top of the selected
(1) Select block
Before the block function is used, select the block according to the following procedures.
Step Operation Example
1 • Move the cursor to the top of the block. 1. THE QUICK
2. THE QUICK
3. THE QUICK
2
• Press F3 (“Block”).
• Move the cursor to “Top-marker of block” and press
Enter key.
Top-marker of block
3 • Move the cursor to the bottom of the block. 1. THE QUICK
2. THE QUICK
3. THE QUICK
4
• Press F3 (“Block”).
• Move the cursor to “Bottom- marker of block” and
press
Enter key.
Bottom- marker of block
5 • When the block is selected, it is highlighted.
1. THE QUICK
2. THE QUICK
3. THE QUICK
6
• To remove the highlighted, press F3 (“Block”).
• Move the cursor to “rEmove markers” and press Enter
key.
1
. THE QUICK
2. THE QUICK
3. THE QUICK
Top-marker of block
Bottom-marker of block
rEmove markers
Copy block
Move block
Delete block
Save block as
Go to the block
F10: Previous
To Next Page
Loading...
