JRC jue-87 - Page 88

3-28
(2) Copy block
Step Operation Example
1 • Select the Block according to
the item (1) “Select Block”.
1. THE QUICK
2. THE QUICK
3. THE QUICK
4. THE QUICK
2 • Move the cursor to the character
where the block is to be inserted.
1. THE QUICK
2. THE QUICK
3. THE QUICK
4
. THE QUICK
3
• Press F3 (“Block”).
• Select “Copy block” and press
Enter key.
1. THE QUICK
2. THE QUICK
3. THE QUICK
1. THE QUICK
2. THE QUICK
4. THE QUICK
* Warning message window (Fig.3.8b) is displayed when the data capacity exceeds 8000 bytes.
(3) Delete block
Step Operation Example
1 • Select the Block according to
the item (1) “Select Block”.
1. THE QUICK
2. THE QUICK
3. THE QUICK
2
• Press F3 (“Block”).
• Select “Delete block” and press
Enter key.
3. THE QUICK
(4) Move block
Step Operation Example
1 • Select the Block according to
the item (1) “Select Block”.
1. THE QUICK
2. THE QUICK
3. THE QUICK
4. THE QUICK
2 • Move the cursor to the character
where the block is to be
removed.
1. THE QUICK
2. THE QUICK
3. THE QUICK
4
. THE QUICK
3
• Press F3 (“Block”).
• Select “Move block” and press
Enter key.
• The highlight is removed
automatically.
3. THE QUICK
1. THE QUICK
2. THE QUICK
4. THE QUICK
The copied
block
The moved block