JRC jue-87 - Page 89

3-29
3
(5) Save block
Step Operation Example
1 • Select the Block according to
the item (1) “Select Block”.
1. THE QUICK
2. THE QUICK
3. THE QUICK
2
• Press F3 (“Block”).
• Select “Save block as” and
press
Enter key.
File name:_
3 • Enter the file name to be saved
and press
Enter Ex. ABC. TLX
• The block is saved to the
memory.
File name: ABC. TLX
(6) Go to the block
Step Operation Example
1 • Select the Block according to
the item (1) “Select Block”.
1. THE QUICK
2. THE QUICK
3. THE QUICK
4. THE QUICK
2
• Press F3 (“Block”).
• Select “Go to the block” and
Enter key.
• The cursor is jumped to a top of
the block. (Note)
3. THE QUICK
4. THE QUICK
NOTE
When the block has not selected, the following messages are displayed. Press any key to erase this
message.
Fig.3.7.1.2b The Message Window Says “Block has not marked”
Block has not marked.
This function is impossible now.
F10:Previous