3-91
3
3.12.6 Call Log by Using S&F Message Transfer
Land user will read out the latest up 10 call log from MES by S&F message transfer. When the
following command is included in the polled message, the MES checks the land ID then transmit MES’s
call log to the land based user in the number is registered in the land ID registration for polling.
Command for call log polling
/LOG/XXX:XXX.....XXX/X..X/
Network type [TELEX, PSDN or Vxx (for PSTN)]
Subscriber’s number (up to 11-digit)
Destination code (3-digit)
Example of call log polling
MES receives the following message:
/LOG/072:02822351/TELEX/
MES transmits the following message to the land based user, country code: 072, subscriber’s number:
02822351 via Telex:
CALL LOG 412345678
96-10-10 14:10-14:13 S+F T 07201822351 202 12345 10
... DELIVERED TO SUBSCRIBER
96-10-10 13:20-13:21 LOGIN T 244
... CALL SUCCESS
96-10-09 07:10-07:11 LOGOUT T 244
... CALL SUCCESS
96-10-09 06:55-06:58 S+F T 07201822351 202 345 10
... DELIVERED TO LES
96-10-08 14:34-14:37 S+F T 07201822351 202 21345 10
... DELIVERED TO SUBSCRIBER
96-10-08 14:10-14:13 S+F T 07201822351 202 20845 10
... DELIVERED TO SUBSCRIBER
96-10-08 06:10-06:11 LOGIN T 244
... CALL SUCCESS
96-10-08 02:10-02:13 S+F T 07201822351 202 12345 10
... NOT DELIVERED TO SUBSCRIBER
To Next Page
Loading...
