Juniper EX3400

Required Privilege
Level
maintenance
Related
Documentation
clear system reboot•
• request system halt
• Routing Matrix with a TX Matrix Plus Router Solutions Page
• request vmhost reboot
List of Sample Output request system reboot on page 370
request system reboot (at 2300) on page 370
request system reboot (in 2 Hours) on page 370
request system reboot (Immediately) on page 370
request system reboot (at 1:20 AM) on page 370
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
request system reboot
user@host> request system reboot
Reboot the system ? [yes,no] (no)
request system reboot (at 2300)
user@host> request system reboot at 2300 message ?Maintenance time!?
Reboot the system ? [yes,no] (no) yes
shutdown: [pid 186]
*** System shutdown message from root@test.example.net ***
System going down at 23:00
request system reboot (in 2 Hours)
The following example, which assumes that the time is 5 PM (17:00), illustrates
three different ways to request the system to reboot in two hours:
user@host> request system reboot at +120
user@host> request system reboot in 120
user@host> request system reboot at 19:00
request system reboot (Immediately)
user@host> request system reboot at now
request system reboot (at 1:20 AM)
To reboot the system at 1:20 AM, enter the following command. Because 1:20 AM is
the next day, you must specify the absolute time.
user@host> request system reboot at 06060120
request system reboot at 120
Reboot the system at 120? [yes,no] (no) yes
Copyright © 2017, Juniper Networks, Inc.370
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches