Juniper PTX10001-36MR - Page 103

12. Reaach the cable manager bracket that you removed in Step 6 and ghten the thumbscrew. See
Figure 35 on page 94.
Figure 35: Reaach the Cable Manager Bracket
13. Close the cable manager latch to hold the power cables in place. See Figure 36 on page 94.
WARNING: Ensure that the power cables do not block access to device
components or drape where people could trip over them.
Figure 36: Close the Cable Manager Latch
RELATED DOCUMENTATION
PTX10001-36MR Power System | 25
PTX10001-36MR Chassis Grounding Cable and Lug Specicaons | 51
94