Juniper PTX10001-36MR - Page 26

• Chassis status LEDs
• Management Port LEDs
Figure 7 on page 17 shows the locaons of the SSD and status LEDs.
Figure 7: PTX10001-36MR SSD Port LEDs and Status LEDs
1—
SSD port LEDs
2—
Status LEDs
The following secons explain how to interpret these LEDs.
PTX10001-36MR SSD Port LEDs
The PTX10001-36MR has two 200-GB Serial Advanced Technology Aachment (SATA) solid-state
drives (SSD). Each SSD has its own status LED. The LEDs are located on the management panel next to
the chassis status LEDs. The LEDs are labeled SSD0 and SSD1.
Table 6 on page 17 describes the SSD status LEDs.
Table 6: PTX10001-36MR SSD LEDs
LED Color State Descripon
SSD0 and SSD1 Unlit O The SSD is not being accessed.
Green Blinking The SSD is acve and being accessed.
17