EasyManua.ls Logo

Juniper PTX10001-36MR - Page 40

Juniper PTX10001-36MR
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PTX10001-36MR AC Power Cord Specicaons
Detachable AC power cords are shipped with the AC power supplies. Table 15 on page 34 lists the
default power cord that is provided for each country. The plug end of the power cord ts into the power
source outlet that is standard for your geographical locaon.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with Naonal Electrical Code (NEC) Secons 400-8 (NFPA 75, 5-2.2) and
210-52 and Canadian Electrical Code (CEC) Secon 4-010(3). The cords that can be ordered for
the PTX10001-36MR are in compliance.
Table 14 on page 31 lists AC power cord specicaons provided for each country or region.
Table 14: PTX10001-36MR Power Cord Specicaons
Locale Cord Set Rang Plug Standards Spare Juniper Model
Number
Graphic
Argenna 16 A, 250 VAC IRAM 2073 Type
RA/3
CBL-JNP-SG4-AR
Australia and New
Zealand
15 A, 250 VAC AS/NZS 4417 CBL-JNP-SG4-AU
Brazil 16 A, 250 VAC NBR 14136 Type
BR/3
CBL-JNP-SG4-BR
China 16 A, 250 VAC GB2099 CBL-JNP-SG4-CH
31

Table of Contents

Other manuals for Juniper PTX10001-36MR

Related product manuals