Table 14: AC Power Supply Specifications (continued)
SpecificationItem
•
Low-voltage line: 10.8 A
•
High-voltage line: 10.8 A
AC input current rating
•
Low-voltage line: 800 W
•
High-voltage line: 1600 W
AC output power
~800 WMaximum System Power Requirement
2728 BTU/HourSystem Thermal Output = (Maximum System Power
Requirement ) * 3.41
Note: 1 W = 3.41 BTU/Hour
SRX4600 Services Gateway AC Power Cord Specifications
A detachable AC power cord is supplied with the AC power supplies. The coupler is type C13 as described
by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power
cord fits into the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in
length, to comply with National Electrical code (NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52,
and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the services
gateway are in compliance.
Table 15 on page 40 provides power cord specifications, and Figure 19 on page 41 depicts the plug on
the AC power cord provided for each country or region.
Table 15: AC Power Cord Specifications
Plug StandardsElectrical SpecificationCountry
AS/NZ 3112-1993250 VAC, 10 A, 50 HzAustralia
GB2099.1 1996 and
GB 1002 1996
(CH1-10P)
250 VAC, 10 A, 50 HzChina
40
To Next Page
Loading...
