Juniper SRX4600

Creating a Bootable USB Flash Drive to Install Junos OS on an SRX4600
Services Gateway
IN THIS SECTION
Creating a Bootable USB Flash-Drive | 103
Installing Junos OS on SRX4600 Services Gateway Using the Bootable USB Flash-Drive | 108
If Junos OS on the SRX4600 Services Gateway is damaged or if you are replacing a solid state-drive (SSD)
that has no Junos OS installed on it, you can use a bootable USB flash drive to install Junos OS on the
SSD.
This topic provides information on how to create a bootable USB flash drive and install Junos OS image
on an SRX4600 Services Gateway.
Creating a Bootable USB Flash-Drive
IN THIS SECTION
Creating a Bootable USB Flash Drive using an SRX High-end Device | 104
Creating a Bootable USB Flash Drive using an SRX4600 Services Gateway | 105
Creating a Bootable USB Flash Drive using a using a Windows Device | 107
Creating a Bootable USB Flash Drive using a MAC OS X Device | 107
You can create a bootable disk using any procedure listed below:
Before creating a bootable USB flash-drive, you must have the following items:
•
3 GB (or larger) USB flash-drive (formatted with a FAT 32 file system)
•
Junos OS image file
Example of the Install media:
junos-install-media-usb-srxhe-x86-64-17.4R1-S1.9.img
103