Chapter 3. Creating User Accounts
Kaye Validator AVS User’s Manual 44
3.3 Creating User Accounts (Cont.)
5. Enter the temporary password again in the Confirm password text box.
At this point you should record the new account’s user ID and temporary password. You
will need to supply this information to the new user. A user ID and password is required
any time a user:
• Changes system preferences
• Creates or modifies a setup
• Changes the setup stored in the Kaye Validator AVS
• Calibrates sensors or verifies sensor calibration
• Manually stops sensor calibration or calibration verification
• Manually starts or stops a qualification study or exposure cycle
• Deletes or moves calibration or qualification data files
• Accesses report utilities
Note: A user account is not active until the user changes the temporary password when
he or she logs in to the Console for the first time.
6. Set the default Designation by pressing the entry on the drop-down list.
7. Enter contacts in the Primary Contact and Secondary Contact text boxes.
8. Press on any specific permissions you wish to give a particular user. These permissions
can include:
• Create setup
• Stop study
• View or edit reports
9. Press Save.
The User Management screen displays with the newly added user name in the user list
To Next Page
Loading...
