1-6 Getting Started Model 2701 User’s Manual
Cables and adapters (Ethernet, RS-232, and trigger link)
Ethernet cross over cable (3 meters) — Keithley P/N CA-180-3.
Models 8501-1 and 8501-2 trigger link cables — Connect Model 2701 to other instru-
ments with Trigger Link connectors (e.g., Model 7002 Switch System). Model 8501-1 is
one meter long; Model 8501-2 is two meters long.
Model 8502 trigger link adapter — Lets you connect any of the two trigger link lines of
Model 2701 to instruments that use the standard BNC trigger connectors.
Model 8503 DIN to BNC trigger cable — Lets you connect trigger link lines one (Volt-
meter Complete) and one (External Trigger) of Model 2701 to instruments that use BNC
trigger connectors. Model 8503 is one meter long.
Model 7009-5 shielded RS-232 cable — Five foot RS-232 cable with a male DB-9 con-
nector on one end and a female DB-9 connector on the other end. Wired as a straight
through cable (not null modem).
Software
The following optional software is available from Keithley:
ExceLINX-1A – This is an economical, easy-to-use, add-in utility for Microsoft Excel
®
and Keithley Integra Series Multimeter/Switch systems. No programming is required.
Configure your measurements quickly using pop-up menus and eliminate time-consuming
and error prone programming. Acquire data into a spreadsheet on the fly during a scan or
transfer data into a spreadsheet after a scan is completed. A few mouse clicks are all it
takes to configure channels, set parameters, triggers, and scan lists. There is no need to
launch a separate data logging or data-crunching application; live data streams
automatically into an Excel workbook, ready for analysis or charting using all of Excel's
powerful built-in tools.
TestPoint application development package — This powerful and economical
programming environment uses object-oriented technology through a drag-and-drop
interface to build a basic system quickly and without in-depth programming. Optional
toolkits (database and statistical process control) are available to expand ExceLINX-1A
capability.
Rack mount kits
Model 4288-1 single fixed rack mount kit — Mounts a single Model 2701 in a standard
19-inch rack.
Model 4288-2 side-by-side rack mount kit — Mounts two instruments (Models 182,
428, 486, 487, 2000, 2001, 2002, 2010, 2400, 2410, 2420, 2430, 2700, 2701, 6430,
6517A, 7001) side-by-side in a standard 19-inch rack.
Model 4288-4 side-by-side rack mount kit — Mounts Model 2701 and a 5.25-inch
instrument (Models 220, 224, 230, 263, 595, 614, 617, 775A, 6512) side-by-side in a
standard 19-inch rack.
To Next Page
Loading...
Need help?
General
