Keysight DSOX1202A - Serial Trigger

118 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
11 Triggers
Serial Trigger
With serial decode features (see Chapter 8, “Serial Bus Decode/Trigger,” starting
on page 81), you can enable serial trigger types. To set up these triggers, see:
• "CAN Triggering" on page 277
• "I2C Triggering" on page 286
• "LIN Triggering" on page 295
Table 2 Half-field holdoff time
Standard Time
NTSC 8.35 ms
PAL 10 ms
PAL-M 10 ms
SECAM 10 ms
Figure 20 Using Field Holdoff to Synchronize to Color Field 1 or 3 (Field 1 mode)