Measurements 15
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 157
4 The Settings softkey will be available to make additional measurement settings
on some measurements.
5 Press the Add Measurement softkey or push the Entry knob to display the
measurement.
6 To turn off measurements, press the [Meas] key again.
Measurements are erased from the display.
7 To stop making one or more measurements, press the Clear Meas softkey and
choose the measurement to clear, or press Clear All.
After all measurements have been cleared, when [Meas] is
pressed again, the default measurements will be Frequency
and Peak-Peak.
Measurements Summary
The automatic measurements provided by the oscilloscope are listed in the
following table. All measurements are available for analog channel waveforms. All
measurements except Counter are available for math waveforms other than FFT. A
limited set of measurements is available for math FFT waveforms (as described in
the following table).
To Next Page
Loading...
