Keysight DSOX1202A User Manual

230 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
21 Print (Screens)
To specify the print options
In the Print Config menu, press the Options softkey to change the following
options:
• Setup Information — Select this to print oscilloscope setup information on your
printout, including vertical, horizontal, trigger, acquisition, math, and display
settings.
• Invert Graticule Colors — Select this to reduce the amount of black ink it takes to
print oscilloscope images by changing the black background to white. Invert
Graticule Colors is the default mode.
• Form Feed — Select this to send a form feed command to the printer after the
waveform is printed and before the setup information is printed. Switch Form
Feed off if you want setup information printed on the same sheet of paper with
the waveform. This option only has an effect when the Setup Information option is
selected. Also, if the amount of setup information will not fit on the same page
with the waveform, it will be printed on a new page regardless of the Form Feed
setting.
• Landscape — Select this to print horizontally on the page instead of vertically
(portrait mode).
To specify the palette option
In the Print Config menu, press the Palette softkey to change the following options.
• Color — Select this to print the screen in color.
The oscilloscope's print driver cannot print color images to color laser printers,
so the Color option is not available when connected to laser printers.
• Grayscale — Select this to print the screen in shades of gray rather than in color.

Keysight DSOX1202A Specifications

General

Brand	Keysight
Model	DSOX1202A
Category	Test Equipment
Language	English