Keysight DSOX1202A - LIN Serial Decode

LIN Triggering and Serial Decode 27
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 297
For LIN decode information see "LIN Serial Decode" on page 297.
LIN Serial Decode
To set up the oscilloscope to capture LIN signals, see "Setup for LIN Signals" on
page 293.
For LIN triggering setup see "LIN Triggering" on page 295.
To set up LIN serial decode:
1 Press the [Analyze] key.
2 Press Features; then, select Serial Bus.
3 Press Features again (or push the Entry knob) to enable the serial bus display.
NOTE
For details about using the LIN Bits menu softkeys, press and hold the softkey in question to
display the built-in help.