80 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
7 Reference Waveforms
2 Press the Skew softkey and turn the Entry knob to adjust the reference
waveform skew.
To display reference waveform information
1 Press the [Analyze] key.
2 Press Features; then, select R1 or R2.
3 Press Save/Clear.
4 In the Save/Clear menu, press the Display Info softkey to enable or disable
reference waveform information on the oscilloscope display.
5 Press the Transparent softkey to enable or disable transparent information
backgrounds.
This setting is also used for other oscilloscope information on the display, like
mask test statistics, etc.
To save/recall reference waveform files to/from a USB storage
device
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See "To save reference waveform files to a
USB storage device" on page 220.
You can recall a reference waveform file from a USB storage device into one of the
reference waveform locations. See "To recall reference waveform files from a USB
storage device" on page 224.
To Next Page
Loading...
