Keysight DSOX1202A - To Scale and Position Reference Waveforms; To Adjust Reference Waveform Skew

Reference Waveforms 7
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 79
One reference waveform can be displayed at a time.
See Also • "To display reference waveform information" on page 80
To scale and position reference waveforms
1 Display the desired reference waveform (see "To display a reference
waveform" on page 78).
2 Press the Scale softkey and turn the Entry knob to adjust the reference
waveform vertical scale.
3 Press the Offset softkey and turn the Entry knob to adjust the reference
waveform vertical offset.
To adjust reference waveform skew
Once reference waveforms are displayed, you can adjust their skew.
1 Display the desired reference waveform (see "To display a reference
waveform" on page 78).