Display Settings 9
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 87
3 In the Grid menu, press the Grid softkey; then, turn the Entry knob to select
the grid type.
To adjust the grid intensity
To adjust the display grid (graticule) intensity:
1 Press [Display].
2 In the Display menu, press Grid.
3 In the Grid menu, press the Intensity softkey; then, turn the Entry knob to
change the intensity of the displayed grid.
The intensity level is shown in the Intensity softkey and is adjustable from 0 to
100%.
Each major vertical division in the grid corresponds to the vertical sensitivity
shown in the status line at the top of the display.
Each major horizontal division in the grid corresponds to the time/div shown in the
status line at the top of the display.
To add an annotation
You can add an annotation to the upper left corner of the oscilloscope's display.
The annotation is useful for documentation purposes, to add notes before
capturing screens.
To add an annotation:
1 On the oscilloscope's front panel, press [Display].
2 In the Display menu, press Annotation.
3 In the Annotation menu, press Annotation to enable the annotation.
4 Press Edit.
5 In the Edit Annotation menu:
To Next Page
Loading...
