Utility Settings 22
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 245
A secure erase (see "Performing a Secure Erase" on page 224) will remove crash
log data along with other non-volatile memory.
To display oscilloscope information
Press [Help] > About Oscilloscope to display information about your oscilloscope:
• Model number.
• Serial number.
•Bandwidth.
•Host ID.
•Software version.
• Installed licenses.
To display the user calibration status
Pressing [Utility] > Service > User Cal Status displays the summary results of the
previous User Cal, and the status of probe calibrations for probes that can be
calibrated. Note that passive probes do not need to be calibrated.
Results:
User Cal date:
Change in temperature since last User Cal:
Failure:
Comments:
Probe Cal Status:
To clean the oscilloscope
1 Remove power from the instrument.
2 Clean the external surfaces of the oscilloscope with a soft cloth dampened with
a mixture of mild detergent and water.
3 Make sure that the instrument is completely dry before reconnecting it to a
power source.
To check warranty and extended services status
To learn the warranty status of your oscilloscope:
1 Point your web browser to: www.keysight.com/find/warrantystatus
2 Enter your product's model number and serial number. The system will search
for the warranty status of your product and display the results. If the system
To Next Page
Loading...
