Utility Settings 22
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 247
• Off — disables the [Quick Action] key.
• Quick Measure All — displays a popup containing a snapshot of all the single
waveform measurements. The Source softkey lets you select the waveform
source (which also becomes the source selection in the Measurement
menu). See Chapter 15, “Measurements,” starting on page 155.
• Quick Mask Statistics Reset — resets mask testing statistics. For more
information, see "Mask Statistics" on page 184.
• Quick Print — prints the current screen image. Press Settings to set up the
printing options. See Chapter 21, “Print (Screens),” starting on page 227.
• Quick Save — saves the current image, waveform data, or setup. Press Settings
to set up the save options. See Chapter 20, “Save/Recall (Setups, Screens,
Data),” starting on page 215.
• Quick Recall — recalls a setup, mask, or reference waveform. Press Settings to
set up the recall options. See Chapter 20, “Save/Recall (Setups, Screens,
Data),” starting on page 215.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un-freezes the display if currently frozen. For more
information, see "To freeze the display" on page 89.
• Quick Trigger Mode — toggles the trigger mode between Auto and Normal, see
"To select the Auto or Normal trigger mode" on page 122.
• Quick Clear Display — clears the display, see "To clear the display" on
page 86.
Once the [Quick Action] key is configured, you simply press it to perform the
selected action.
To Next Page
Loading...
