158 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
15 Measurements
Measurement Valid for Math FFT
*
Notes
"Snapshot All" on page 159
"Amplitude" on page 161
"Average" on page 164 Yes, Full Screen
"Base" on page 162
"Bit Rate" on page 169
"Counter" on page 169 Not valid for math waveforms.
"Delay" on page 170 Measures between two sources. Press
Settings to specify the second source.
"Duty Cycle" on page 170
"Fall Time" on page 170
"Frequency" on page 168
"Maximum" on page 160 Yes
"Minimum" on page 161 Yes
"Rising Edge Count" on
page 175
"Falling Edges Count" on
page 175
"Positive Pulse Count" on
page 174
"Negative Pulse Count" on
page 174
"Overshoot" on page 162
"Peak-Peak" on page 160 Yes
"Period" on page 167
"Phase" on page 171 Measures between two sources. Press
Settings to specify the second source.
"Preshoot" on page 163
"Rise Time" on page 170
To Next Page
Loading...
