202 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
18 Frequency Response Analysis
• Move Marker — lets you turn the Entry knob to move a marker across the chart to
see the measured gain and phase values at each frequency point.
• Trace — lets you choose the plot(s) that are included in the chart. Press this
softkey, then turn the Entry knob to select either gain or phase, then push the
knob or press the softkey again to enable or disable the plot.
• Autoscale — automatically sets the scale and offset of the gain and phase plots
based on the measured values.
You can save the analysis results by choosing [Save/Recall] > Save > Format and
selecting the Frequency Response Analysis data (*.csv) option.
To Next Page
Loading...
