228 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
21 Print (Screens)
4 Press the Options softkey to select the print options.
See "To specify the print options" on page 230.
5 Press the Palette softkey to select the print palette. See "To specify the palette
option" on page 230.
6 Press the Press to Print softkey.
You can stop printing by pressing the Cancel Print softkey.
You can also configure the [Quick Action] key to print the display. See "Configuring
the [Quick Action] Key" on page 246.
See Also • "To add an annotation" on page 87
The oscilloscope will print the last menu visited before you opened the Print Config menu.
Therefore, if you have measurements (Amplitude, Frequency, etc.) showing on the display
before you open the Print Config menu, the measurements will be shown on the printout.
To print the display showing the Print Config menu at the bottom, open the Print Config menu
twice; then, press the Press to Print softkey.
To Next Page
Loading...
