Keysight DSOX1202A - Page 249

249
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes
User's Guide
23 Web Interface
Accessing the Web Interface / 250
Control Instrument / 251
Get Image / 254
Save/Recall / 255
Identification Function / 257
Instrument Utilities / 258
Setting a Password / 259
When Keysight InfiniiVision 1200 X-Series and EDUX1052A/G oscilloscopes are
set up on the LAN, you can access the oscilloscope's built-in web server using a
web browser. The oscilloscope's web interface lets you:
• View information about the oscilloscope like its model number, serial number,
host name, IP address, and VISA (address) connect string.
• Control the oscilloscope using the Remote Front Panel.
• Send SCPI (Standard Commands for Programmable Instrumentation) remote
programming commands via the SCPI Commands applet window.
• Get screen images and save or print them from the browser.
• Save setups, screen images, waveform data, and mask files.
• Recall setup files, reference waveform data files, or mask files.
• Activate the Identification function to identify a particular instrument by
causing a message to be displayed or a front panel light to blink.
• View installed options, firmware versions, and calibration status (via the
Instrument Utilities page).
• View and modify the oscilloscope's network configuration.