Web Interface 23
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 253
The SCPI Command window is useful for testing commands or entering a few
commands interactively. When creating automated programs for controlling the
oscilloscope, you will typically use the Keysight IO Libraries from within a
programming environment like Microsoft Visual Studio (see "Remote
Programming with Keysight IO Libraries" on page 254).
To send remote programming commands to the oscilloscope via the SCPI
Commands applet window:
1 Access the oscilloscope's web interface (see "Accessing the Web Interface" on
page 250).
2 When the oscilloscope's web interface is displayed, select the Control Instrument
tab, then select Use Instrument IO.
The SCPI Commands applet appears within the browser web page.
To Next Page
Loading...
