A75UM3EC (Ver. E.2)
3-74
Trailing Edge
Trailing Edge (+) : Some amount of margin is provided to the trailing edge of copy.
Trailing Edge ( - ) : Some amount of original’s trailing image is prevented from being copied.
(Maximum amount of Trailing Edge)
4.00 inches for both plus and minus
(Unit of setting)
0.01 inches
Note : The result of copy is different if the selected Cut Mode is different.
1. In the Synchro Mode, margin is simply provided (plus setting) and original’s trailing
image is simply prevented from being copied (minus setting) as follows.
2. If you provide some amount of margin by plus setting in the Standard Cut, the same
amount of leading image is lost from the copy.
And if you prevent some amount of original’s trailing image from being copied, the same
amount of margin is provided to the leading edge of copy.
Trailing Edge (+) Trailing Edge ( )
Direction of
original feeding
Original
Copy
Original
Copy
Synchro Cut
Im age
Scanner
To Next Page
Loading...
