KIP 2080 - Page 123

A75UM3EC (Ver. E.2)
3-78
[How to clear the amount of Leading/Trailing Edge]
You have 2 ways to clear the decided amount of Leading/Trailing Edge.
1. When the frame of the amount of Leading/Trailing Edge is thick, push the Clear Key.
The amount becomes 0.00”.
2. It is also possible to clear the amount of Leading Edge and Trailing Edge pushing the Reset Key.
However, note that not only the amount of them but also all other user settings are initialized
according to the Standard Mode if you push the Reset Key.
(In order to clear the amount of Leading Edge and Trailing Edge pushing the Reset Key,
[Leading Edge : 0.00”] or [Trailing Edge : 0.00”] should be registered to the Standard Mode as the
default condition. As for the Standard Mode, refer to “Standard Mode” on the page 3-151.)
/
L
/
R
SET COPY
ROTATE
AUTO ZOOM AUTO PAPER
CON CURRENT
PRINT
0
1
4
7
.
2
5
8
C
3
6
9
0%
001
R
Shift Margin Folder
OFF
1
2
3
4
Centering
0.00"
NegativeMirror
T. Edge
L. Edge
1.00"
0.50"
0%
001
R
Shift Margin Folder
OFF
1
2
3
4
Centering
0.00"
NegativeMirror
T. Edge
L. Edge
1.00"
0.00"