A75UM3EF (Ver. E.2)
3-106
4) Press any way of layout “a.”, “b.” and “c.”.
The selected way of layout is colored.
If you select either “Layout b.” or “Layout c.”, the Auto Zoom Mode is automatically selected and
the LED lamp of the Auto Zoom Key lights up.
Note : If you select either “Layout b.” or “Layout c.”, it becomes impossible to select “Sort”.
5) Change each user settings as you like.
And then, set the original to the scanner.
Note : If you wish to change such image quality settings as Original Type, Background
Mode, Despeckle Mode, Threshold and Sharpness (Density is excluded), make sure
to change them before you scan the original since these settings work at the time of
scanning in order to process the image data before it is sent and stored in the
memory as the Set Copy Job.
It is no use to change these settings after scanning.
Since it is possible to do sample copy in the Set Copy Mode, check the result of
copy for each original if required.
(Image data is not added to the Set Copy Job even if you do Sample Copy in the Set
Copy Mode.)
Make sure to change these settings before scanning.
To Next Page
Loading...
