A75UM3EF (Ver. E.2)
3-107
6) Push the Basic Screen Key to indicate the Basic Screen on the LCD.
“Layout/Sort” is indicated if you selected either “Layout b.” or “Layout c.”.
(Basic Screen Key) (Basic Screen)
7) Push the Start Key to scan the original.
Since the scanned image is not printed out but simply is stored in the memory, set the next original
and scan it.
The LCD indicates how much percent of memory is occupied with the image data.
Note : It is possible to scan originals to make the Set Copy Job although the printer is printing out
another Copy Job.
(2% of memory is occupied now.)
8) Scan as many originals as you need.
Note : If the memory is fully occupied with the image data during scan of some original, the LCD
indicates the error message “Memory is full”.
The image data of that original is not included in the Set Copy Job.
As for formerly scanned originals, their image data are stored and it is possible to print them
out pushing the Start Key.
(Error message)
To Next Page
Loading...
