A75UM3E3 (Ver. E.2)
3-12
3) If “Auto” is not selected, press “Auto” to enter the Auto Sheet Size Mode.
“Auto” is colored when selected.
4) Press any of “Plain Paper”, “Vellum” and “Film” according to the used sheet media.
The selected material is colored.
Note : There may be the case that the Ready Indicator blinks right after you changed the material
setting.
This is because the printer is changing the fusing temperature according to the selected
material setting since the proper temperature is different among plain paper, vellum and
film.
It is possible to do pre-scan even if the Ready Indicator is blinking.
However, the printer starts printing when the indicator stops blinking.
5) Set the original to the scanner.
0%
001
Roll Size Media
2:30"
Vellum
1:36"
Plain Paper
3:24"
Film
4:18"
Plain Paper
Bypass
Auto
36" 18"
17"
12"
11"
8.5"
34"
30"
24"
22"
Vellum
Film
Plain
Paper
0%
001
Roll Size Media
2:30"
Vellum
1:36"
Plain Paper
3:24"
Film
4:18"
Plain Paper
Bypass
Auto
36" 18"
17"
12"
11"
8.5"
34"
30"
24"
22"
Vellum
Film
Plain
Paper
0%
001
Roll Size Media
2:30"
Vellum
1:36"
Plain Paper
3:24"
Film
4:18"
Plain Paper
Bypass
Auto
36" 18"
17"
12"
11"
8.5"
34"
30"
24"
22"
Vellum
Film
Plain
Paper
0%
001
Roll Size Media
2:30"
Vellum
1:36"
Plain Paper
3:24"
Film
4:18"
Plain Paper
Bypass
Auto
36" 18"
17"
12"
11"
8.5"
34"
30"
24"
22"
Vellum
Film
Plain
Paper
To Next Page
Loading...
