Klemsan Klea 320P-D - Figure 2-1 Mounting KLEA into the Panel; Figure 2-2 Fixing KLEA to the Panel; Figure 2-3 Loosening of Terminal Block Screws

16
4
Quadrant
Energy Analyzer
4
Quadrant
Energy Analyzer
A
KLEA
nal
Network yzer
Fig. 2-2 Fixing KLEA to the panel
There are 2.5mm2 and 1.5mm2 screwed female terminal blocks connected to fixed male
terminal blocks on KLEA. Remove female terminal blocks and loosen their screws.
Fig. 2-3 Loosening of Terminal Block Screws
Before wiring up voltage and current ends to KLEA, you must be sure that
the power is cut.
SECTION 2 INSTALLATION