9
4
Quadrant
Energy Analyzer
4
Quadrant
Energy Analyzer
BÖLÜM 1 GENERAL INFORMATION
1.1 Symbols
Caution:
Wherever used, this symbol indicates that there is important
information that must be taken into consideration.
Danger of Electric Shock:
This symbol indicates that there is dangerous voltage or current.
1.2 General Warnings
• Do not work under live supply conditions. Before installation, turn off the power of the
panel or any other related equipment.
• Installation, operation and commissioning (putting into service) of KLEA must be
performed by qualified personnel.
• The device must be put into service only after all connections are made.
• KLEA is connected to current transformer(s). Before disconnecting current transformer
leads, be sure that they are short circuited elsewhere or connected to a parallel load
which has sufficie tly low impedance. Otherwise dangerously high voltages will be
induced at the current transformer leads. Same phenomena also apply for putting into service.
• Keep and store away from moisture, dust, vibration and wet environment.
• For cleaning, remove the dust with a dry cloth. Do not use abrasives, solvents or alcohol.
• There are no user serviceable parts inside. Maintenance and calibration can only be
carried out at manufacturer’s end.
• It is recommend to connect circuit breakers or automatic fuses between voltage inputs
of Klea and the network.
1.3 Receipt Control and Contents of Delivery
When you receive the package, please be sure that,
• packing is in good condition,
• product has not been damaged during transportation,
• product name and reference (order) number conforms to your order.
SECTION 1 GENERAL INFORMATION
To Next Page
Loading...