Klemsan Klea 320P-D - Date; Figure 3-4 Example for Setting the Date

23
4
Quadrant
Energy Analyzer
4
Quadrant
Energy Analyzer
3.1.2 Date
In order to change the date, operator should press OK key, when“Date”tab is highlighted.
Press right and left to move between day, month and year entries. Press up and down
keys to change the values. Press OK key to complete date setting.
Startup Settings
Language English
Date 07 January 2013
Time 17:45:28
CTR 1
VTR 1.0
Connection 3phase 4wire
Start
Fig. 3-3 Date
Example:
In order to enter “7 January 2013”:
Date 06 December 2012
1
Date 07 December 2012
2
Date 07 December 2012
3
Date 07 January 2012
4
Date 07 January 2012
5
Date 07 January 2013
7
Date 07 January 2013
6
Fig. 3-4 Example for Setting the Date
SECTION 3 MENUS