Korg PA1000

510| Audio In/Out, Voice and Guitar Processor
Mixing the lead voice
▪ While in the Global > Mic Setup > Setup page, use the Lead > Level and Pan
knobs to adjust the level and pan of the Lead Voice.
Parameter Meaning Value
Level Level of the Lead Voice Off, -60dB…0dB
Pan Position of the Lead Voice in the stereo panorama Left, L99 …
C (Center) …
R99, Right
Vibrato and bending
▪ While in the Global > Mic Setup > Setup page, use the Voices Vibrato Boost
pop-up menu to specify how the Modulation message will affect vibrato.
Voices Vibrato
Boost
Meaning
Boost Adds more vibrato once the Modulation value reaches the correspond-
ing amount of vibrato and then returns to the original amount at rest
position.
Manual Allows full range control of vibrato, once the Modulation message is re-
ceived.
▪ While in the Global > Mic Setup > Setup page, use the Voices Pitch Bend
Range parameter to set the bending range (in semitones) after receiving a
Pitch Bend message.