Editing the Voice/Guitar Presets |539
Adding vibrato
▪ Use the Vibrato pop-up menu to choose a vibrato style.
Vibrato assists in providing separation between your dry singing voice and
the harmonies as well as to add some movement to the rigid pitch contour in
Notes mode harmony. Even the smallest amount of vibrato applied to your
harmony voices can achieve this. Like the Humanize effects, each voice is
treated slightly differently by the Vibrato algorithm so the voices don’t all
sound exactly the same. There are 7 styles available in progressively more
intensity as you browse down the list.
▪ Use the Amount parameter to vary the amount of vibrato intensity for the
overall style with this parameter. All the styles were designed to be useful at
middle values but you can add or remove vibrato as you like.
Equalizing the voices
▪ Use the LoEQ and HiEQ parameters to apply low-frequency and high-fre-
quency equalization to all the harmony voices.
Mixing in the lead voice
▪ Use the Lead Level parameter to adjust the level of the lead voice mixed with
the effect.
To Next Page
Loading...
