Korg PA1000 - Page 926

914| File management
Load from Loaded data
Pa3XLe, Pa900,
Pa600, Pa300,
HAVIAN 30
You can load most data as if they were Pa1000 data. There are however
a few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG SongBook Editor
software.
• Favorite Style banks no longer exist, so you are prompted to load them
into the User locations.
• Voice Presets, Scale Presets and MIDI Presets are not loaded.
• Global settings are not loaded.
Pa2X, Pa800,
Pa500, Pa588
You can load most data as if they were Pa1000 data. There are however
a few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG SongBook Editor
software.
• Favorite Style banks no longer exist, so you are prompted to load them
into the User locations.
• Performance banks over #09 are missing and are not loaded. Since
Pa1000 Keyboard Set banks are larger, load the individual Performances
into the additional locations of the other banks.
• Global settings are not loaded.
Pa1X, Pa1X Pro,
Pa1X Elite
You can load most data as if they were Pa1000 data. There are however
a few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG SongBook Editor
software.
• Performance banks over #09 are missing and are not loaded. Since
Pa1000 Keyboard Set banks are larger, load the individual Performances
into the additional locations of the other banks.
• Global settings are not loaded.
Pa80, Pa60, Pa50,
Pa50SD,
microARRANGER,
Liverpool
You can load most data as if they were Pa1000 data. There are however
a few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Programs must be converted to Sounds. First load the SET folder, then
separately load the PCG files from the PROGRAM folder.
• Global settings are not loaded.