Kyocera KM-4035

Maintenance
Description
item No.
2FD/2FF/2FG-3.0
1-4-50
U246
Left stapling Right stapling Adjustment method
Proper
Increase the preset
value.
Decrease the preset
value.
Upper side is longer. Lower side is longer.
Lower side is longer. Upper side is longer.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting the side registration cursor stop position
1. Select the desired cursor position. The selected item is displayed in reverse.
2. Change the setting using the cursor up/down keys.
Display Description Setting range Initial setting
FRONT Front side registration cursor stop position -4 to +4 0
REAR Rear side registration cursor stop position -4 to +4 0
END Trailing edge registration cursor stop position -4 to +4 0
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.