Kyocera KM-4035

2FD/2FF/2FG-3.0
1-4-59
Maintenance
Description
item No.
U328 Side ejection setting
Description
Sets whether to eject to the side of the machine when an optional curl eliminator is installed.
Purpose
Set according to the preference of the user.
Method
1. Select ON or OFF.
Display Description
ON To eject to the side of the machine
OFF Not to eject to the side of the machine
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U330 Setting the number of sheets to enter stacking mode during sort operation
Description
When sort copying is set to perform automatically in the output form setting of the user simulation, sets the
number of sheets at which the eject location is switched to the optional finisher (only when the finisher is
installed).
Purpose
To be set as required according to the number of copies the user makes.
Method
Press the start key. The current setting is displayed.
Setting
1. Set the number of sheets (o to 250) using the numeric keys or cursor up/down keys.
2. Press the start key. The setting is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U331 Setting the paper ejection
Description
Sets whether the copies will be ejected in the same or opposite order as the originals.
Purpose
Set according to the preference of the user.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the ejection order.
Display Setting
FACE-DOWN (NOMAL) Face down ejection
FACE-UP (SPEED) Face up ejection with bitmap copy
FACE-UP (MEMORY) Face up ejection with memory copy
Initial setting: FACE-DOWN
• To the auxiliary tray of the 3000-sheet finisher
• To the booklet stitcher
• To the 1000-sheet finisher
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.