Kyocera KM-4035

Maintenance
Description
item No.
2FD/2FF/2FG-3.0
1-4-58
U277 Setting auto application change time
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer or fax (only if the printer kit or fax kit is installed).
Purpose
According to user request, changes the setting.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description Setting range Initial setting
Switching time 30 to 270 (s) 30
The setting can be changed by 30 s per step.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U280 Setting the individual border erase mode indication
Description
Sets whether to display the individual border erase mode on the copy default screen.
Purpose
According to user request, changes the setting.
Method
1. Press the start key.
2. Press INDIVIDUAL BORDER ERASE. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display Description
PAGE SETTING ON Displays the individual border erase mode
PAGE SETTING OFF Not to display the individual border erase mode
Initial setting: OFF
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U326 Setting the black line cleaning indication
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the contact glass when scanning from the optional DP.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF.
Display Description
ON Displays the cleaning guidance
OFF Not to display the cleaning guidance
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.